PostInject.HomePage History
Hide minor edits - Show changes to output
March 07, 2009, at 03:42 PM
by - de-spam
Changed lines 1-30 from:
to:
!!What?
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
March 07, 2009, at 02:44 PM
by - 2001
Changed lines 1-30 from:
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
to:
http://forums.slimdevices.com/member.php?u=26084 order viagra, 1118, http://forums.relicnews.com/member.php?u=171768 viagra tabs, 141409, http://www.swishtalk.com/member.php?u=81902 buy viagra, %),
March 07, 2009, at 01:43 PM
by - de-spam
Changed lines 1-30 from:
to:
!!What?
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
March 07, 2009, at 01:22 PM
by - yKihvJOevoicg
Changed line 1 from:
http://www.warhammeralliance.com/forums/member.php?u=130534 where buy generic viagra, 575, http://www.dmwmedia.com/user/orderviagrapills viagra online, %DD, http://www.swishtalk.com/member.php?u=81902 buy viagra online, kour,
to:
http://forums.hostrocket.com/member.php?u=42896 viagra order online, rwpmo, http://forums.relicnews.com/member.php?u=171768 uk order viagra, 936, http://revision3.com/forum/member.php?u=116324 online viagra, oqnsyo,
March 07, 2009, at 12:03 PM
by - 2001
Changed lines 1-30 from:
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
to:
http://www.warhammeralliance.com/forums/member.php?u=130534 where buy generic viagra, 575, http://www.dmwmedia.com/user/orderviagrapills viagra online, %DD, http://www.swishtalk.com/member.php?u=81902 buy viagra online, kour,
March 02, 2009, at 11:29 AM
by - de-spam
Changed lines 1-30 from:
to:
!!What?
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
March 02, 2009, at 11:16 AM
by - 2001
Changed lines 1-30 from:
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
to:
qbUwxC <a href="http://bicwngyfmpym.com/">bicwngyfmpym</a>, [url=http://vjgjnqeinedx.com/]vjgjnqeinedx[/url], [link=http://yasgcelbygnl.com/]yasgcelbygnl[/link], http://ehrkgquthvjk.com/
February 28, 2009, at 02:12 PM
by - de-spam
Changed lines 1-30 from:
to:
!!What?
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
February 28, 2009, at 07:03 AM
by - 2001
Changed lines 1-30 from:
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
to:
yFn1Lf <a href="http://ntnrlzvolfzy.com/">ntnrlzvolfzy</a>, [url=http://dgrjvpwzewlo.com/]dgrjvpwzewlo[/url], [link=http://ofraihwajxqs.com/]ofraihwajxqs[/link], http://dcyvntrkmypy.com/
April 21, 2008, at 08:02 AM
by - de-spam
Changed lines 1-3 from:
<a href= http://rogerebert.suntimes.com/apps/pbcs.dll/article?AID=/19990326/REVIEWS/903260303/ >Roger Ebert - The Mod Squad</a>
http://www.salty2k.com/sse/
to:
!!What?
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
April 21, 2008, at 07:33 AM
by - Portia Blackwell
Changed lines 1-30 from:
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
to:
omnitolerant supercredit ambilevous sentience pericline syconarian unstoical sucker
<a href= http://rogerebert.suntimes.com/apps/pbcs.dll/article?AID=/19990326/REVIEWS/903260303/ >Roger Ebert - The Mod Squad</a>
http://www.salty2k.com/sse/
<a href= http://rogerebert.suntimes.com/apps/pbcs.dll/article?AID=/19990326/REVIEWS/903260303/ >Roger Ebert - The Mod Squad</a>
http://www.salty2k.com/sse/
March 25, 2008, at 09:51 AM
by - de-spam
Changed lines 1-3 from:
<a href= http://www.kaddb.com/ >King Abdullah II Design and Development Bureau - KADDB</a>
http://www.khovaki.com/cncshc/
to:
!!What?
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
March 25, 2008, at 03:52 AM
by - Paulette Koch
Changed lines 1-30 from:
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org |postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
[[Attach:postinject-pl |Download the program]], but it would pay to read the instructions below first.
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
!!How?
Run [[Attach:postinject-pl |this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
:-f:fix missing hostnames on addresses (specify hostname after the -f)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.3 (Nov 5 2004):added the -f option
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
to:
omnitolerant supercredit ambilevous sentience pericline syconarian unstoical sucker
<a href= http://www.kaddb.com/ >King Abdullah II Design and Development Bureau - KADDB</a>
http://www.khovaki.com/cncshc/
<a href= http://www.kaddb.com/ >King Abdullah II Design and Development Bureau - KADDB</a>
http://www.khovaki.com/cncshc/
Added lines 5-6:
Note that a better way of doing this kind of thing is [[http://archives.neohapsis.com/archives/postfix/2005-04/1476.html|documented here]]. I'll keep this program around in case it's needed in some bizarre set of circumstances.
Added line 20:
:-f:fix missing hostnames on addresses (specify hostname after the -f)
Added line 26:
:Version 0.3 (Nov 5 2004):added the -f option
Changed line 26 from:
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, just email me.
to:
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, bugs may be fixed, features may even be added: just email me.
Added lines 3-4:
[[Attach:postinject-pl Download the program]], but it would pay to read the instructions below first.
Added lines 20-22:
!!When?
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
:Version 0.1 (Sept 4 2004):basic version working
:Version 0.2 (Nov 4 2004):added 'recipient:' checking, a bit more verification code included (thanks Alexander <a.an at zebratelecom.ru>)
Changed line 2 from:
[=PostInject=] is a program to allow a collection of postfix queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
to:
[=PostInject=] is a program to allow a collection of [[http://www.postfix.org postfix]] queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
Changed line 2 from:
PostInject is a program to allow a collection of postfix queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
to:
[=PostInject=] is a program to allow a collection of postfix queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
Added line 7:
Changed lines 7-9 from:
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"
to:
@@Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order\\
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"@@
Changed lines 1-19 from:
to:
!!What?
PostInject is a program to allow a collection of postfix queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
[=Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"=]
!!How?
Run [[Attach:postinject-pl this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, just email me.
PostInject is a program to allow a collection of postfix queue files to be sent as email messages. The queue files are "working copies" of emails that postfix stores in @@/var/spool/postfix@@. There is probably a built-in postfix way to do it, but I couldn't find it when I needed to.
!!Why?
A postfix upgrade went awry, and I found that it had been about 12 hours with email not going anywhere (both incoming and outgoing). Fortunately, postfix was being as smart as it could, and dumped all the messages in @@/var/spool/postfix/corrupt@@.
In the logs, I was seeing a lot of things like:
[=Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: bad extra offset file active/4/432E08763E
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: 432E08763E: envelope records out of order
Sep 4 12:50:12 kallisti postfix/qmgr[2201]: warning: saving corrupt file "432E08763E" from queue "active" to queue "corrupt"=]
!!How?
Run [[Attach:postinject-pl this program]], and give it the names of all the queue files that you have lying around not getting sent where they should be. You can also give it options if you like:
:-h:help
:-s:the server to send to, defaults to 127.0.0.1
:-d:the delay (in seconds) between sending groups of messages (default 60)
:-g:the number of messages to send in a group (default 5)
You'll want to tweak the options to suit. If you have all the users running spamassassin, and the server isn't the speediest thing around, consider increasing the delay up to 120 seconds, just to stop the queue getting large and risking timeout bounces. However, if sending mail is nice and fast on your system, you can probably get away with a delay of 10 seconds or so. The default is fairly conservative, but did cause the queue to grow slowly larger with spamassassin running over most of the messages on my system.
!!Who?
This was written by Robin Sheat <robin@kallisti.net.nz> as a result of need. Hopefully it isn't something I'll need again, but it's possible others may want it. Patches will be considered, just email me.
Page last modified on March 07, 2009, at 03:43 PM